|
We are instrumental in undertaking fabrication work for Pre engineered Building Systems that find extensive application in the construction industry. These pre-fabricated building systems facilitate ease of use and can be custom designed as per the specific requirements of our clients.
We fabricate these building systems on the following parameters:
|
Building Length
|
-
Building length: Distance between the outside flanges of end wall columns in opposite end walls
-
End bay length: Distance from outside of the outer flange of end wall columns of center line of the first interior frame columns
-
Interior bay length: Distance between the center lines of two adjacent interior main frame columns
-
Ideally, bay length ranges from 6m to 7.5 m (up-to 15 m is also possible)
|
|
Building Height
|
-
Distance from the bottom of the main frame column base plate to the top outer point of the eave strut
-
It becomes the distance between finished floor level and top of eave strut in case of recessed or elevated columns from finished floor
-
Height: Up to 30 m
-
Roof Slope (x/10) is the angle of the roof with respect to the horizontal
-
Commonly demanded roof slopes are 1/10 and 120
|
|
Design Load
|
-
Roof Live Loads: 0.75 kN/m2 Design for snow loads, seismic loads, collateral loads, or any other local climatic condition
-
Loads applied are in line with the latest American codes and standards applicable to pre-engineered buildings unless otherwise requested at the time of quotation
|
|
Design Wind Speed
|
As per IS: 875 for location
|
|
